According to BS EN 573-1
Chemical Composition
% | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | - | Other | Alu | |
Each | Total | |||||||||||
|
|
|
|
|
|
|
|
|
|
| ||
Min | 0.40 | - | 0.15 | - | 0.8 | 0.04 | - | - | - | - | - | - |
Max | 0.8 | 0.7 | 0.40 | 0.15 | 1.2 | 0.35 | 0.25 | 0.15 | - | 0.05 | 0.15 | Balance |
Applications
Automation Assembly, Processing- Machinery, Electronic Engineering, Semi- Conductor, Equipment Manufacturing, Structural Base Plate, Aircraft Fittings, Camera Parts, Mechanical Engineering, Jig & Fixtures, Material Handling, Precision Engineering, Construction Industry.
Typical Physical Properties |
|
Tensile strength |
|
Ultimate (KSI) | 38 to 42 |
Yield (KSI) Elongation3 | 35 to 38 |
Percent Min. in 2 inch or 4D4 | 8 to 10 |
Typical Brinell Hardness (500 kg Load/ 10mm ball) Typical Ultimate | 95 |
Shearing Strength (KSI Longitudinal Direction) | 30 |
Min Ultimate (PSI) | 38,000 |
Min Yield (PSI) | 35,000 |
Specitications | ASTM B 221 |
| ASME SB 221 |
Thickness (T) | Width (W) | Length (L) |
1" | 19 " | 12 ft |
1.1/4 " | 18 " | 12 ft |
1.1/2 " | 18 " | 12 ft |
1.3/4 " | 18 " | 12 ft |
2" | 16 " | 12 ft |
2.1/4 " | 16 " | 12 ft |
2.1/2 " | 16 " | 12 ft |
2.3/4 " | 16 " | 12 ft |
3" | 16 " | 12 ft |
3.1/4 " | 16 " | 12 ft |
3.1/2 " | 14 " | 12 ft |
4 " | 16 " | 12 ft |
Thickness (T) | Width (W | Length (L) |
3/8 " | 8" | 12 ft |
3/8 " | 10" | 12 ft |
3/8 " | 12" | 12 ft |
1/2 " | 8" | 12 ft |
1/2 " | 10" | 12 ft |
1/2 " | 12" | 12 ft |
5/8 " | 8" | 12 ft |
5/8 " | 10" | 12 ft |
5/8 " | 12" | 12 ft |
3/4 " | 8" | 12 ft |
3/4 " | 10" | 12 ft |
3/4 " | 12" | 12 ft |
|
|
VIJAY PRAKASH GUPTA & SONS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |